First snowmen and now pumpkins. I have several shows coming up in the fall and I want to be prepared. I feel like I need to do a lot now because once the fairs start I won't have as many weekends to be able to make stuff. I thought that some pumpkin appetizer/tapas plates would be cute. I used the template from Clayshare and then sized it to the size I wanted to be able to press the GR forms in the middle.
These pumpkins are more tall.


The other pumpkins were more squat and round.




I got into the halloween spirit and decided to make some mugs too. Who wants some dragon's blood?




I even made the handle look like a dragon's claw.




Or how about some witches brew?

I know that it's August and the weather is very hot, but I was feeling a snowman so I made one. This form might look familiar because it starts the same as the pumpkin, but there are 3 of them stacked. I think these are going to be popular and need to make more of them.

This project took multiple turns. It all started because I decided that I wanted to learn the basket weave stitch. I had seen pictures of crocheted items with it for a while and it always looked amazing. I don't know why, but I assumed that it would be hard to do. In reality it's easy - as long as you keep track of your stitches. This ruana involved a lot of frogging.

This yarn is Fourth of July by Briar Rose. I started off thinking that this would make a great sweater, but midway through the first skein I knew it wanted to be something different. At first I thought that it wanted to be a poncho, but then it hit me - ruana. It drapes perfectly and it will be super warm once the cool weather comes.


This pattern uses 4 skeins of Fourth of July for a total of about 2200 yards. It uses a 5 mm hook.

Stitches:
ch - chain
hdc - half double crochet
dc - double crochet
fpdc - front post double crochet
bpdc - back post double crochet

The basket weave stitch cast on is in mulitples of 4 + 2. I cast on 70 stitches because this was originally going to be a sweater and I wanted it to be about 24 inches wide.




Row 1: ch 2, dc all the way across, hdc in the last stitch
Row 2: ch 2, *fbpdc in each of the next 4 dc, bpdc in each of the next 4 dc. Repeat from * hdc in the last stitch.

Ok here's the trick to this pattern. When you cast on you did it in multiples of 4. If you do it in an even multiple then row 3 (and all the odd rows) will be the same as row 2. If you do it in an odd multiple then row 3 (and all the odd rows) will be the opposite of row 2. The important thing is to pay attention - for a series of 4 rows you want the posts to be on the same side. I have 17 which is an odd number so it goes back and forth.

Row 3: ch 2, *bpdc in each of the next 4 dc, fpdc in each of the next 4 dc. Repeat from * hdc in the last stitch.
Row 4: ch 2, *fbpdc in each of the next 4 dc, bpdc in each of the next 4 dc. Repeat from * hdc in the last stitch.

Now here comes the switch. Anywhere that you were fp will now be a bp and anywhere that was a bp will be a front post.

Row 5: ch 2, *fbpdc in each of the next 4 dc, bpdc in each of the next 4 dc. Repeat from * hdc in the last stitch.
Row 6: ch 2, *bpdc in each of the next 4 dc, fpdc in each of the next 4 dc. Repeat from * hdc in the last stitch.
Row 7: ch 2, *fbpdc in each of the next 4 dc, bpdc in each of the next 4 dc. Repeat from * hdc in the last stitch.
Row 8: ch 2, *bpdc in each of the next 4 dc, fpdc in each of the next 4 dc. Repeat from * hdc in the last stitch.

Ok now repeat until you reached your desired lenth. I used almost all of the 2 skeins. Mine ended up being 68 rows long.

Make 2 of these




Line the two panels up. You want to make sure that where the panels line up the basket weave switches from the fp to the bp.
Sew halfway up. I sewed about 36 rows up. Weave in your ends and you're done.

I was a little nervous for this firing. Not for any real reason other than Craig and I have never repaired a kiln before. What if it went all wrong? But it didn't. As disappointing as the last two firings have been this one was almost perfect. I had one drip onto the shelf and a couple of vinyl issues (both not kiln related), but overall I'm really happy with the results from this kiln.

And boy did I need the kiln working again. I had to stop making because my ready for bisque and my in progress shelves were all completely full. I emptied this kiln and immediately loaded it with bisque. I think I'm going to do another bisque right away when this one is done since it will take me a couple of days to glaze everything coming out of the bisque. With travel for work and back to the cabin I only have like 2.5 weeks left at home to be ready for the McKenzie Childs show at the beginning of October. I've got mostly everything made that I want to, but it doesn't do me any good if everything is still greenware.

My favorite pieces are the sets of cala lily candle holders, the butter dish, and my accidental tie dye mug.

Amaco Honey Flux x3 all over, Mayco Frosted Lemon in a line down the middle Amaco Smokey Merlot x3 around the top, Amaco Blue Rutile around the top of the bottom	Amaco Honey Flux x3 all over, Mayco Frosted Lemon in a line down the middle Amaco Chun Plum x3 around the top with hints of Smokey Merlot, Amaco Blue Rutile around the top of the bottom
Midnight Ceramics Boxed Wine x3 Sexy Mermaid x2	Midnight Ceramics Toasted Arsnic x2, Amaco Seaweed x2
Top Left: Amaco Smoke x3 Top Right: Amaco Lavender x3 Bottom Left: Amaco Mulberry x3 Bottom Right: Amaco Deep Sea x3	Colors for Earth Maize and Laurel Green wiped back, 2167 clear
Mayco Iron Wash wiped back, Mayco Northern Woods x2	Left: Mayco Just Froggy x3, Mayco Fruit of the Vine x3, 2167 Clear Right: Mayco Norse Blue x3, Mayco Sandstone x3, Light flux on the join. Mayco Just Froggy x3, Mayco Sour Apple x3
Amaco Deep Sea x3, 2167 clear over the white	Amaco Deep Sea x3, Amaco Seaweed x2 on the top
Front Side: Amaco Deep Sienna Speckle x3 Note: not good for details	Back Side: Amaco Deep Sienna Speckle x3, Amaco Seaweed x3 Note: not good for details
Front side: Amaco Mulberry x3, Mayco Dark Flux on the rim	Back side: Amaco Mulberry x3, Mayco Dark Flux on the rim
Front side: Outside - Amaco Lavender x3, Inside/Rim/Handle - Mayco Lavender Mist x3 Muddy Waters x2	Outside side: Outside - Amaco Lavender x3, Inside/Rim/Handle - Mayco Lavender Mist x3 Muddy Waters x2
Front Side Left: Amaco Mulberry and something. I LOVE the tie dye look, but no idea what I did to get it. 2167 clear Right: Amaco Deep Sea x3, 2167 clear	Back Side Left: Amaco Mulberry and something. I LOVE the tie dye look, but no idea what I did to get it Right: Amaco Deep Sea x3
Front Side: Mayco Tuxedo, Coyote Parakeet x3	Back Side: Mayco Tuxedo, Coyote Parakeet x3
Outside - Amaco Lavender x3, Inside/Rim/Handle - Mayco Lavender Mist x3 Muddy Waters x2	Mayco Iron Wash wiped back, Amaco Sky x3
Refire: Amaco Marigold x3 i nthe last fire. Just a little Amaco Honey flux. Not sure if I like this, but the pin holes are gone	These were a mix of 2 Mayco Stroke and Coats, I know one was Moody Blue and I *think* the other was Cara-bein Blue. Beak is Mayco Sunkissed. Eyes are Tuxedo
Mayco Black underglaze wiped back. 2167 clear	Coyote Parakeet x2
Top: Georgie's Cherry Fiz x2 Bottom: Spectrum Autumn Purple x2	Left: Amaco Deep Sienna Speckle x3 Right: Coyote Parakeet x3 (should have done 2)
Left: Stem Amaco Ancient Copper x3, Vine and Leaf Amaco Oolong Gloss x3, Body Amaco Hibiscus Gloss x3 (except it's not glossy for some reason) Middle:Stem Amaco Ancient Copper x3, Leaf Mayco Just Froggy x3, Vine Mayco Sour Apple x3, Body Amaco Deep Sienna Speckle x3 Right:Stem Amaco Java Bean x3, Leaf Mayco Just Froggy x3, Vine Mayco Sour Apple x3, Body Mayco Jack O Lantern x3	Refire: Last fire was Spectrum Nori Green. This one added a coat of Amaco Honey Flux over it and it is redeemed!
Gnomes with glazes I was using on other things	Baby gnomes with glazes I was using on other things
Georgie's Blizzard Blue	Various Stroke and Coats