This past week has been a whirlwind. On Saturday I had my first Chocolate Party since before the pandemic. The Chocolate Party is something I started in like 2002 and was an annual tradition. It is a whole party devoted to chocolate. It was great to be able to have everyone over. I managed to not take a single picture, but we had a great time. I was so wiped that Sunday I barely left the couch except to clean up the house.

This kiln happened in the whirlwind of preparing for the party. I love everything that came out of it.

Kentucky Mudworks Hydra x3 Light flux on the rim	Kentucky Mudworks Triton x3 Light flux on the rim
Kentucky Mudworks Brown Bear Various Stroke and Coats Laguna Power Turquoise x3 Mayco Night Moth x2	Kentucky Mudworks Brown Bear Various Stroke and Coats Mayco Frosted Lemon x3 Mayco Night Moth x2
Kentucky Mudworks Brown Bear Various Stroke and Coats Mayco Frosted Lemon x3 Mayco Night Moth x2	Kentucky Mudworks Brown Bear Various Stroke and Coats Laguna Power Turquoise x3 Mayco Night Moth x2
Kentucky Mudworks Brown Bear Various Stroke and Coats Mayco Frosted Lemon x3 Mayco Night Moth x2	Kentucky Mudworks Brown Bear Various Stroke and Coats Laguna Power Turquoise x3 Mayco Night Moth x2
Top Left: Amaco Lavender x3 Top Right: Amaco Weeping Plum x3 Bottom Left: Amaco Storm x3 Bottom Right: Amaco Aqua x3	Top Left: Amaco Storm x3 Top Right: Amaco Lavender x3 Bottom Left: Amaco Smoke x3 Bottom Right: Amaco Aqua x3
Left: Amaco Storm x3 Right: Amaco Weeping Plum c3	Both Coyote Pam's Blue x3
Left: Laguna 60 Amaco Blue Midnight x3 Right: Amaco Storm x3	Amaco Aqua x3
Spectrum Autumn Purple x2	Left: Kentucky Mudworks Triton x3 Right: Amaco Weeping Plum x3
Kentucky Mudworks Brown Bear Kentucky Mudworks Tortuga x3	Kentucky Mudworks Brown Bear Kentucky Mudworks Jade Moss x3
Left: Amaco Storm x3 Middle: Amaco Aqua x3 Right: Kentucky Mudworks Triton x3	Row 1: Amaco Lavender x3 Row 2: Amaco Storm x3 Row 3: Amaco Aqua x3 Row 4: Amaco Weeping Plum x3
Coyote Pam's Blue x3	This is many of the other glazes that are listed. I cleaned my brush on this. Not sure if I like how it turned out
Top Left: Kentucky Mudworks Hydra x3 Top Right: Kentucky Mudworks Hydra x3 Bottom Left: Amaco Aqua x3 Bottom Right: Mayco Hot Tamale Amaco Storm x3	Left: Hat Amaco Aqua x3, Body Amaco Smoke x3, Nose Mayco Cutie Pie Coral Left Middle: Hat KY Mudworks Jade Moss x3, Body Amaco Smoke x3, Nose Mayco Cutie Pie Coral Right Middle: Hat Amaco Lavender x3 Mayco Muddy Waters x2, Body KY Mudworks Hydra x3, Nose Mayco Cutie Pie Coral, Hair Mayco Dandelion x2 Right: Hat Mayco Frosted Lemon x3 Mayco Night Moth x2, Body Amaco Storm x3, Nose Mayco Cutie Pie Coral, Hair Mayco Dandelion x2
Left: Hat Amaco Storm x3, Body Amaco Smoke x3, Nose Mayco Cutie Pie Coral Left Middle: Hat KY Mudworks Hydra x3 Mayco Night Moth x2, Body Amaco Lavender x3, Nose Mayco Cutie Pie Coral Right Middle: Hat Laguna Power Turquoise x3 Mayco Night Moth x2, Body Amaco Weeping Plum x3, Nose Mayco Cutie Pie Coral Right: Hat KY Mudworks Hydra x3, Body Amaco Aqua x3, Nose Mayco Cutie Pie Coral	Left: Hat Laguna Power Turquoise x3 Mayco Night Moth x2, Body Amaco Aqua x3, Nose Mayco Cutie Pie Coral Left Middle: Hat Mayco Lavender Mist x3 Mayco Muddy Waters x2, Body Mayco Hot Tamale x3, Nose Mayco Cutie Pie Coral Right Middle: Hat Mayco Sour Apple x3, Body Amaco Lavender x3, Nose Mayco Cutie Pie Coral Right: Hat Coyote Pam's Blue x3, Body Amaco Storm x3, Nose Mayco Cutie Pie Coral
Left: Hat KY Mudworks Triton x3, Body Amaco Smoke x3, Nose Mayco Cutie Pie Coral Left Middle: Hat Mayco Frosted Lemon x3 Mayco Night Moth x2, Body Amaco Storm x3, Nose Mayco Cutie Pie Coral Right Middle: Hat Laguna Power Turquoise x3 Mayco Night Moth x2, Body Amaco Weeping Plum x3, Nose Mayco Cutie Pie Coral Right: Hat KY Mudworks Jade Moss x3, Body Amaco Smoke x3, Nose Mayco Cutie Pie Coral	Left: Hat Mayco Frosted Lemon x3 Mayco Night Moth x2, Body Amaco Weeping Plum x3, Nose Mayco Cutie Pie Coral Left Middle: Hat Mayco Frosted Lemon x3 Mayco Night Moth x2, Body Mayco Sour Apple x3, Nose Mayco Cutie Pie Coral Middle: Hat Mayco Lavender Mist x3 Mayco Night Moth x2, Body Coyote Pam's Blue x3, Nose Mayco Cutie Pie Coral Right Middle: Hat Mayco Hot Tamale x3 Mayco Night Moth x2, Body Mayco Frosted Lemon x3, Nose Mayco Cutie Pie Coral Right: Hat KY Mudworks Hydra x3 Mayco Night Moth x2, Body Mayco Sour Apple x3, Nose Mayco Cutie Pie Coral
Hat Laguna Power Turquoise x3 Mayco Night Moth x2, Body Mayco Hot Tamale x3, Nose Mayco Cutie Pie Coral	Red: Mayco Hot Tamale x3 Green: Mayco Sour Apple x3 Blue: Mayco Carrabein Blue x3 White Dots Mayco Cotton Tail - thick dots
Laguna 60 Red: Mayco Hot Tamale x3 Green: Mayco Sour Apple x3 Blue: Mayco Carrabein Blue x3 White Dots Mayco Cotton Tail - thick dots	These were a custom order that came out awesome on KY Mudworks Brown Bear Clay Left: Coyote Oasis x3 Amaco Seaweed x2, 4 wheeler Mayco Hot tamale x3 Right: Mayco Lavender Mist x3 Mayco Muddy Waters x2, 4 wheeler Mayco Sunkissed x3

Let me tell you about standing up all those mushrooms. There was one that I knew from glazing that didn't stand up. I was convinced it was one of the red ones. So I'm standing them up and I go to put this blue one up and it rolls off the shelf and down the side. Ugh. The entire kiln was full. There was nothing to do but start unloading. When I got to the last few shelves I remembered a pair of long thin tweezers that I have in the kitchen. I used them to pick up the mushroom from the very bottom of the kiln. Saved me some time and heavy lifting.

Loving these bowls on top. I love blue-green colors.

Is it ever too early to start making pumpkins? The little ones are just so cute, but also so finicky to make. I've learned to always have two leaves and two vines because one is very likely to break off before it gets glazed. Once they're glazed they are unlikely to break (unless I drop the box like I did at one of my shows).

I actually make these in a little bit of an assembly line. Roll out the clay and use the pumpkin cutter to cut - let those setup a bit so they aren't too floppy. Then I make all the stems. Then roll the clay thinner and cut out the leaves. Finally I make coils for the vines and wrap them around handles. Once I have all the pieces then it's time to make the pumpkins.

First I make body of the pumpkin. Next I attach the vines then the leaves and then top it off with the stem. Last I do the final touches of moving the leaves and the stems the way I want.

Have had a whole lot of magnets come out of the last kilns that needed magnets glued on. It doesn't take a whole lot of time if you lay them all out. First everything gets globs of glue (e6000) then everything gets a magnet. The lesson I learned was to not try to have multiple magnets in my hand because they really want to join together and will jump around if I'm not careful.


I also had two wine gnomes come out who got their corks. There are another handful coming out of the next kiln.

As I've been ramping up production for 2023 I realized I have nowhere to store this stuff. I still had things in bins from the last show plus my dining room table was completely full. In the basement I had a really old entertainment center. My husband suggested that we pack up the stuff that was in it since a lot of it wasn't being actively used (I need to find fancy friends and have them over to use my grandmother's crystal goblets) and get rid of the 1970s pre-ikea but ikea like unit. I should have taken a picture before we dismantled it, but neglected to. It was quite ugly and very


In it's place we put up this wall shelving. The tracks and the shelves came from Home Depot. It was a lot cheaper than buying prebuilt shelves or using wood. I usually hate the wire shelves, but they had this plastic that snaps into it and with the weight of the pottery it works.




I made the decision to unpack everything that was in the bins since the last couple of shows were fall/holiday focused. Everything is now in one place where I can see it and I have a lot more than I realized. I have been debating whether or not I am ready for the Maryland Home and Garden show in March and I can now say that I am. I have all the basics and I can focus on making some creative show pieces for the show. I also need to stop making mugs until I sell some because there is no more room. I still have another dozen or so working their way through the drying to glazing process.

Does anyone else find making cone packs horribly tedious? It's always a chore to do, but I love seeing them all lined up when I'm done.

Also why do the ones above cone 0 come in different colors, but the ones that are bisque temps (04, 05, 06) are all the same color?