A more varied kiln this time. Still some leftover crabs, but also a lot of lavender. There is a ginko platter that I"m excited about too.

I can't believe that it's March already. I've made a lot, but this is the first kiln to make it all the way through. It is all crabs! Nothing but crabs. There will be more exciting stuff soon. I did have one crab test in here with blue crabs, but I'm not loving it. The red just pops the way the blue on blue doesn't.

One other small test in here with diagonal crabs in the trinket dishes. It made it so much easier to glaze, will be doing this again.

Laguna 60 Mayco Black ug wiped back Mayco Hot Tamale x2 Mayco Norse Blue x3 Light Flux Sweeps 2167 Clear	Laguna 60 Mayco Black ug wiped back Mayco Hot Tamale x2 Mayco Norse Blue x3 Light Flux Sweeps 2167 Clear
Laguna 60 Mayco Black ug wiped back Mayco Hot Tamale x2 Mayco Norse Blue x3 Light Flux Sweeps 2167 Clear	Laguna 60 Mayco Black ug wiped back Mayco Hot Tamale x2 Mayco Norse Blue x3 Light Flux Sweeps 2167 Clear
Laguna 60 Mayco Black ug wiped back Mayco Hot Tamale x2 Mayco Norse Blue x3 Light Flux Sweeps 2167 Clear	Laguna 60 Mayco Black ug wiped back Mayco Hot Tamale x2 Mayco Norse Blue x3 Light Flux Sweeps 2167 Clear
Laguna 60 Mayco Black ug wiped back Mayco Hot Tamale x2 Mayco Norse Blue x3 Light Flux Sweeps 2167 Clear	Laguna 60 Mayco Black ug wiped back Mayco Hot Tamale x2 Mayco Norse Blue x3 Light Flux Sweeps 2167 Clear
Laguna 60 Mayco Black ug wiped back Mayco Hot Tamale x2 Mayco Norse Blue x3 Light Flux Sweeps 2167 Clear	Laguna 60 Mayco Black ug wiped back Mayco Hot Tamale x2 Mayco Norse Blue x3 Light Flux Sweeps 2167 Clear
Laguna 60 Mayco Black ug wiped back Mayco Hot Tamale x2 Mayco Norse Blue x3 Light Flux Sweeps 2167 Clear	Laguna 60 Mayco Black ug wiped back Mayco Hot Tamale x2 Mayco Norse Blue x3 Light Flux Sweeps 2167 Clear
Laguna 60 Mayco Black ug wiped back Mayco Moody Blues x2 Mayco Norse Blue x3 Light Flux Sweeps 2167 Clear

This kiln is all crabs. Nothing super exciting, but glad to have some inventory. I do have a couple of blue crab tests in here. We'll see if that becomes a thing or not.

I had forgotten about this jewelry until I was cleaning up. I made it back in December, but needed to add the neclace and earring hardware. The picture is a bit messy, but I love how the actual pieces turned out.

At one of my December shows I was a klutz and knocked over my ornament trees. Surprisingly I only had 4 ornaments break. One was beyond repair, but the other three were just broken in one place. I've been wanting to try kintsugi for a long time and even had a few other pieces set aside for when I finally got around to it. I decided to take the plunge and try it. I already have e6000 that I use for making magnets and decided for this first foray that would be good enough as an adhesive. So all I needed was the leaf adhesive and the metal leaf paper.

I had done a good bit of research and decided that I could use imitation leaf vs spending on the real thing for my first try. I did have 3 colors to choose from (gold, silver, brass), but for these I went with all gold.






Step 1 was to do a little sanding. Two of the larger plates weren't actually broken they just had a deep crack. I sanded the edges so they weren't as rough. Step 2 was to glue the pieces together. As I said before I used e-6000 as the glue. For the pieces with the cracks I just wanted to fill them in. It took me a couple of tries to figure out how to get glue into the cracks without having it spill over. It was some careful wiping down. I let the glue dry overnight so it had time to solidify.








Step 3 is to add the leaf adhesive. The directions said to let it dry for 30 minutes or until it isn't cloudy any more. I made my fingers sticky touching it. Step 4 is to add the gold leaf. It's hard because if you get the adhesive on your fingers then the paper sticks to your hands and not the pottery. Took me only one try to learn that lesson. It helped at some points to break the leaf into smaller pieces before I tried to apply it. I found that for different pieces I liked different widths of the leaf. For the first piece I did the front first and then switched to doing the back first so that I could learn more. The first side you do needs to be completely done so that you don't have other things sticking to the adhesive.








The last step is to spray with a sealer. I only had a matte sealer and I thought it wouldn't make a difference. It absolutely did. I still like these pieces, but I will definitely be buying a gloss sealer for the future.








This was really fun to try, but I definitely won't be doing it frequently. I did put the ornaments on my tree immediately and love them. However, the plates aren't functional. They will make nice wall art, but these aren't things that I think most people would want. I don't have a lot of pieces break in the firing process, but those that do will likely continue to end up in the trash. I will reserve this for speical pieces that break that I don't want to lose.

Well I should have scraped off the bear glaze. Aside from that everything else looks great, but that bear is saggy. I do love how all the dill items came out.

Laguna 60 Left: Spectrum Autumn purple x1 on the top, x2 on the bottom. Mayco Light flux on the bottom. Spectrum Kimchi x1 on the top Right: Spectrum Sangria x1 on the top, x2 on the bottom. Mayco Light flux on the bottom. Spectrum Kimchi x1 on the top Birds are Mayco BlueBird x2 Sunkissed on the nose	Laguna 60 Amaco Snow x3
Laguna 60 Mayco black ug wiped back Mayco Norse blue x3, Mayco Light flux sweeps Mayco Hot Tamale x2 2167 clear	Laguna 60 Coyote Oatmeal x2 (ok maybe more on the one on the right :)
Colors for Earth Bright Green, Lemon Peel Amaco Moss x3 on the rim 2167 clear	Colors for Earth Bright Green, Lemon Peel 2167 clear
Colors for Earth Bright Green, Lemon Peel Amaco Moss x3 on the rim 2167 clear	Colors for Earth Bright Green, Lemon Peel Top 3 rows: Amaco Marigold x3 on rim and back Bottom 3 rows: Amaco Moss x3 on the rim and back 2167 clear
Laguna 60 Mayco black ug wiped back Mayco Cotton Tail x2, Hot Tamale 2167 clear	Laguna 60 Mayco black ug wiped back Mayco Cotton Tail x2, Hot Tamale Kentucky Mudworks Cherry Blossom x2 on the rim and back 2167 clear
Laguna 60 Mayco black ug wiped back Mayco Norse blue x3, Mayco Light flux sweeps Mayco Hot Tamale x2 2167 clear	Laguna 60 Mayco black ug wiped back Mayco Norse blue x3, Mayco Light flux sweeps Mayco Hot Tamale x2 2167 clear
Laguna 60 Mayco black ug wiped back Mayco Norse blue x3, Mayco Light flux sweeps Mayco Hot Tamale x2 2167 clear	Laguna 60 Mayco black ug wiped back Mayco Norse blue x3, Mayco Light flux sweeps Mayco Hot Tamale x2 2167 clear
Body: Coyote Really Red x3 Hat: Opulence Emerald x3 Various Mayco stroke and coats